FT520 Batch Flow Processor

Applications

Electronics industry Chemical industry

Features

1. Waterproof and dustproof design
2. 96 x 96mm microprocessor Specific Gravity/Baumé/Salinity/ Concentration transmitter
3. Measuring unit: SG/°Bé/ ppt/ %
4. User-friendly operation with text and graphic illustration, clear signs and easy to understand
5. Measuring value can be selected for figure or chart display
6. Trace mode can display historical measured value curve from 3-minute to 4-week program
7. Equipped with logbook function
8. Large LCM display with auto-sense backlight and contrast setting function
9. Built-in Specific gravity - Concentration conversion table for setting, up to 10 points
10. Cell constant, Pure water, Known solution— 3 types calibration
11. Simultaneous display of measurement value and temperature
12. Automatic temperature compensation for setting
13. Equipped with one analog output DC 0/4~20mA, Max.500Ω and RS-485 interface
14. Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
15. With password and multi-key design, enhanced security protection
16. LED indicated alarm
17. IP 65 (NEMA 4X)

Specific Gravity Sensor

Load Cell & plummet principle High accuracy & long lifetime of reliability Wide range measurement Anti-acid gas design

Key Benefits

Many water companies want to measure free chlorine residuals without the need for chemical buffers traditionally associated with such measurements. Acetate and phosphate buffers are expensive and environmentally unfriendly. Buffer delivery systems are maintenance intensive and have fairly costly consumables and there are health and safety considerations in the handling of the acids and high disposal costs if the acid treated water is unable to be fed back into the water supply. Amperometric cells and most polarographic probes only respond to hypochlorous acid, (HOCl). HOCl dissociates into hypochlorite (OCl–) in a pH dependent manner. This is why most chlorine monitors need acid buffers in most applications. The typical pH of water measured on a water treatment works may range from 7 to 9.2. Chemical buffering reduces the pH to between 5 and 6 and ensures that the majority of the residual chlorine is present as HOCl (see graph below).

• Low purchase cost
• Low cost of ownership
• Reduced pH dependency (largely pH independent)
• Stable and reliable
• Bufferless
• Reagentless

The PC-100 pH/ORP monitors utilize microprocessor technology to provide you enhanced capabilities with economical price. The compact design fits in small space installation. The PC-100 features for sample monitoring.

Applications

Water treatment Pure water System Clean room Wastewater treatment Scrubber Electronics process

Features

1. 48 x 96 mm Microprocessor pH/ORP Monitor & Controller
2. Sensor slope performance diagnosis & error message
3. User-friendly operation
4. Automatic temperature compensation
5. Compatible with Pt-1000 and NTC 30K temperature probe
6. Isolated current output DC 0/4~20mA
7. Gradually continuous sample measurements average function to enhance stability

Key Benefits

• Immediate response to process changes in coagulation treatment – coagulation monitor
• Maintain high quality finished water through improved coagulation control –coagulation controller
• Reduce coagulant/polymer costs – coagulant analyzer
• Automate dosing coagulant/polymer dosing using the streaming current monitor –coagulant control
• Ensure coagulation reliability – coagulant analyzer
• Improve operator efficiency – coagulant analyzer
• Improve filter performance and coagulation treatment – coagulation controller
• Monitor your coagulation control process – coagulation monitor

Streaming Current Monitors Standard Features

• Patented sensor design
• Quick replacement probe and piston
• Self-diagnostic sensor
• High-volume flow minimizes sensor fouling
• Removes electronics from harsh environments
• Corrosion-free Nema 4x enclosure (IP65)
• Optional computer interface
• Spare probe cartridge and piston included
• Auxiliary input signals

Product Description

Applications such as environmental and wastewater sampling involve some uncertainty about what samples may contain. When dealing with unknown or unpredictable sample types, you need a durable pH probe you can trust to deliver accurate measurements regardless of the contaminants you encounter. The pH2000 has a double junction reference design to prevent reference fouling by heavy metals and other sample contaminants. When you travel to remote sites to collect data, it is especially important that obtaining the measurements you need is hassle free. The pH2000 features an Ultem® body and a booted meter connection for durability in the field. The sealed reference design requires no maintenance. Compatible with any meter accepting a BNC connector.

• Durable and low maintenance: Ultem® body construction, reinforced meter connection, and sealed reference design
• Great for testing unknown sample types: Double junction reference protection prevents reference cell contamination
• Accurate measurements across full pH scale (0-14)
• Instantly ready for use: Shipped in storage bottle for long shelf life – guaranteed for one year
• Compatible with any meter accepting a BNC connector
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee